Choose a LEGO Tallneck display case for the complete 76989 scene, from its broad head and neck antennae to the landscape, Aloy and Watcher below. Keep the actual case axes and full base footprint with that scene. A model-specific cutout and an exterior height alone do not describe all the space around the upper outline.
Keep the machine and its landscape together
LEGO’s official 76989 specification gives a model reference of over H34 × W23 × D17 cm. It identifies the disc-shaped head, neck antennae, tail-like structures and long legs, plus a landscape stand with birch tree, grass and a rusty stoplight.
Aloy has a bow and brick-built spear. The Watcher has a choice of blue, yellow or red eyes; those choices do not mean three separate Watchers. Retain the actual figure and weapon positions in the scene you want confirmed.
The widest upper part may project beyond the smaller landscape footprint. Record the front and side outline of the complete build, rather than measuring only the ground beneath its legs. Use the actual model instructions for its intended arrangement; this guide does not assign an unverified range of head or leg movement.
A locating cutout answers a different question from head clearance
| Scene part | Include in the record | Ask the case maker |
|---|---|---|
| Head and upper outline | Whole disc, antennae and furthest projections. | Clear receiving space for the complete intended view. |
| Legs and landscape | Actual ground base, tree, grass and stoplight details. | Cutout, studs or other intended floor arrangement. |
| Aloy and Watcher | Figure, bow, spear and chosen positions. | Supplied locators and view past the front border. |
Blacked Brick describes a model-locating cutout and studs for a figure in front. Wicked Brick describes embedded model and Aloy studs. Keep each maker’s locations with its own base; one description does not supply the other’s layout.
A ground locator may establish where the lower scene sits without describing every upper projection. Ask for the complete arrangement used by the maker before treating a set-specific base as a drawing of the entire receiving volume.
Preserve width and depth labels instead of silently rotating the comparison
These original product sources were read on 18 October 2026. They include a reseller that expressly identifies Flying Box as the maker and shipper. Five independent source domains therefore do not mean five independent physical case designs or fitting tests.
| Source | Published figures | Keep unresolved |
|---|---|---|
| Wicked Brick | External W28 × D23 × H38.3 cm. | Usable cavity above the installed base and exact scene. |
| Flying Box | L10 × W8 × H15 in. | Case inside/outside unlabelled; complete base footprint. |
| Brickcessories | Assembled 260 × 200 × 400 mm. | Individual axes and inside/outside unlabelled. |
| Blacked Brick | External W23 × D29 × H38 cm. | Original viewing direction, labelled cavity and locating pattern. |
| Display Geek / Flying Box | Box H15 × W10 × D8 in; base W10.5 × D8.5 in. | Case boundary unlabelled; retain the separate larger base. |
Blacked Brick’s W23 × D29 cm exterior and Wicked Brick’s W28 × D23 cm exterior use different width/depth sequences. Do not swap the labels to make the numbers appear equivalent. First identify the intended front view, then compare actual interiors and full outer footprints.
For Display Geek’s listing, the stated base extends beyond the box’s plan dimensions. Keep both lines in the shelf enquiry. The narrower box description does not establish that the whole assembly sits within the same furniture rectangle.
Keep the printed rear and small characters in the chosen viewing plan
A printed landscape can extend the scene behind the model, while a transparent rear leaves the room visible. Check the light-coloured head, dark legs, tree and small figures from the normal approach. The case’s front edge can hide Aloy even when the machine remains prominent.
The authorized image below comes from the CubeBuff Tallneck case gallery. Its current product describes a printed mountain-and-forest configuration, external W28 × D23 × H38.3 cm and no separate information plaque. Transparent rear views elsewhere in that gallery do not establish another selectable configuration.
Check the cover’s route past the entire upper outline
Wicked Brick and the cited CubeBuff product describe a clear surround lifting from base grooves. Reserve that route past the disc head and antennae, plus somewhere for the surround to rest. For another construction, obtain its own opening instructions.
Display Geek describes its display as stationary on a shelf. Keep that product-specific use statement with the selected order. General UV or protection wording on a listing is not an independently measured rating in this guide.
Use the Tallneck scene and base worksheet with the LEGO shelf-case guide. The lighting and reflections guide covers the finished viewing conditions.
Common questions
Does matching the landscape footprint establish head clearance?
Include the whole disc, antennae, legs and landscape in the receiving outline. A locating cutout alone does not describe the upper space.
Are Display Geek and Flying Box necessarily different case designs?
The cited reseller page expressly says its product is made and shipped by Flying Box. Retain that relationship when comparing the two descriptions.
Comments
Share a display tip or ask a question.