Choose a LEGO Jaws display case for the exact 21350 scene you want to keep. The Orca beside an attacking shark on the sea base is a different arrangement from a fully built shark on its separate stand. Include the chosen shark, boat, figures and supports before comparing enclosure sizes or a wall frame.
The two official shark presentations need separate records
LEGO’s official 21350 description offers a shark emerging from the seawater base or a fully built shark on its own stand. The Orca has a removable cabin roof, an adjustable boom and rigging. Chief Brody, Matt Hooper and Quint complete the character group.
For the attack scene, record the complete seawater base, boat, shark and selected figure positions as one arrangement. Include the boom and rigging in their intended state under the model instructions. A hull-only outline misses both the scene around it and the projections above it.
For the separately supported shark, identify where its stand and the figures will sit relative to the Orca. Ask the case maker to confirm that precise composition. A product naming 21350 does not by itself establish that it receives the boat and every alternative shark arrangement together.
The official descriptive dimensions refer to the Orca boat: over H35 × L59 × W20 cm. Keep that reference attached to the boat. It is not the measured footprint of a combined scene or room for opening the cabin roof. The page’s smaller dimension widget uses different axis labels and rounded inch values; avoid combining those blocks into a new specification.
Printed water can change which parts remain visible
| Choice | What stays in the record | Question for the maker |
|---|---|---|
| Sea-base attack | Boat, emerging shark, complete base and figure positions. | Which locators and cavity describe this exact scene? |
| Separate full shark | The fully built shark, its stand and any separately shown boat. | Is the additional supported footprint explicitly included? |
| Printed front and rear | Selected sea background and any front splash artwork. | Do the print and plaque obscure details you want to see? |
iDisplayit’s 21350 option combines a vinyl sea background with a printed water effect on the front panel. Choose that effect for the view it creates. It does not add physical water, extra model space or clearance around the shark.
A clear front may suit a close look at the lower scene, while a printed splash may suit the intended composition from the room. Ask for the selected version’s view with the actual arrangement. A background photograph cannot establish how a panel opens or whether the full separate shark is received.
Keep a published exterior separate from the cavity
These descriptions were read on 18 October 2026. They retain the suppliers’ dimension definitions and are not physical fit, mount or protection tests by DisplayCasePro.
| Product | Published figures or format | Definition to retain |
|---|---|---|
| Wicked Brick 21350 | W65 × D23 × H37.3 cm. | Inside/outside boundary unstated; lift-off surround. |
| Blacked Brick 21350 | External W64 × D23 × H37 cm. | Exterior only; embedded studs do not specify every scene position. |
| iDisplayit 21350 | Inside L65 × W21 × H36 cm; outside L67 × W23 × H37 cm. | Separately labelled dimensions; confirm the chosen supported scene. |
| DIA wall-frame guide | Wall-frame format; no numerical cavity or retention drawing. | Confirm the exact frame and open or covered construction. |
| Brick In It 21350 | W65 × D25 × H40 cm. | Axes supplied; inside/outside boundary unstated. |
Wicked Brick describes a clear surround lifted from grooves in its base, with clear, printed and premium printed versions. Ask where its receiving dimensions begin above the supplied base and which arrangement they describe. A larger height number alone does not settle the alternative shark question.
Blacked Brick identifies embedded studs, a plaque and an optional printed background. Obtain the intended locating positions with the cavity drawing. Exterior dimensions and a studded base are useful facts, but do not provide the complete support map.
Brick In It gives 3 mm clear acrylic, a 5 mm base and metal corner cubes. Keep its size line with that product rather than turning panel thickness into an assumed clear interior. Ask about usable space and opening for the selected version.
A wall presentation needs an identified support and cover
DIA’s Jaws display guide promotes vertical presentation, but its comparison calls the frame open while later text mentions a clear acrylic front. Request the actual product’s construction and model-retention instructions. Those descriptions do not establish one universal enclosing wall case.
Choose a wall format only after the maker identifies how the intended scene is received and supported. Keep any altered arrangement explicit. Turning an assembled model toward a wall is not a substitute for a model-specific receiving design.
Cabin access comes after the enclosure’s opening question
Decide whether the cabin roof stays installed during ordinary display. If you want to reveal the cabin, establish how the enclosure opens first and where the roof and removed enclosure parts will rest. Closed model height does not specify the path for either operation.
iDisplayit describes fourteen fittings and a clear cover resting on the base. It also says the case is not designed for relocation with LEGO inside. Keep that instruction with the selected case; its 81 × 26-stud floor reference is not permission to carry the populated scene.
Use the Jaws scene, shark and opening worksheet with the LEGO shelf case guide to keep the receiving arrangement, complete exterior and furniture opening route together.
Common questions
Does the official boat size include every Jaws display option?
Keep it as an Orca reference. Obtain the complete outline and support plan for the attack scene or separately displayed full shark.
Is a printed front splash extra room for the shark?
It is a visual treatment on the panel. Confirm usable space independently from the artwork.
Comments
Share a display tip or ask a question.