Choose a display case for LEGO Twilight The Cullen House 21354 after arranging the house, tall tree, truck and characters as one scene. A forest-printed rear and a printed display floor create different settings. Check which scene and base a case receives before using a house-only size or an attractive product photograph to make the decision.
The house is one part of the Cullen scene
LEGO’s official 21354 description identifies a three-story house, a separate tall tree and Bella’s truck. Seven minifigures accompany a brick-built, posable Jacob wolf. Keep the wolf separate from the minifigure count when describing what you want inside the case.
The house’s published reference is over H21 × W37 × D18 cm. That reference does not establish the footprint of the house, truck and tree in every arrangement. Record the full scene from above, including the furthest branches and the truck’s final position.
List your intended characters and accessories alongside the main components. If Edward and Bella will be on the tree rather than beside the house, preserve that choice in the scene record. A supplier needs the arrangement you intend to retain, not just the statement that you own set 21354.
Choose which story the room-facing view should tell
| Priority | Keep visible | Question for the case maker |
|---|---|---|
| Modern house exterior | The façade, balcony and full tree silhouette. | Where does the selected base place the house and tree? |
| Characters and truck | The chosen figures, separate wolf and vehicle. | Which positions keep small faces clear of the case edge? |
| Interior details | The chosen rooms after the enclosure is open. | What happens to the surround and removed house sections? |
Look at the planned scene from the height at which it will normally be seen. The truck can interrupt a low view of characters even when everything fits within the floor outline. A front information plaque also occupies part of that view; include it rather than treating it as a decoration to squeeze in later.
Choose whether the rear of the house matters. A scenic forest can strengthen a front-facing composition, while a clear rear leaves another viewing opportunity where the furniture permits it. A printed backdrop does not supply another physical tree or extend the receiving floor.
Compare dimensions only after keeping their definitions
The following descriptions were read on 18 October 2026. They are published product specifications; DisplayCasePro has not fitted the model or tested their protection, opening or supported loads.
| Case | Published dimensions | Definition to retain |
|---|---|---|
| Wicked Brick | W500 × D320 × H253 mm. | Inside/outside boundary unlabelled. |
| Kingdom Brick Supply | Approx. inside L45.6 × W29.6 × H26.4 cm; outside L47.1 × W31.1 × H27.3 cm. | Approximate cavity and complete exterior are separate. |
| Brickcessories | Assembled 530 × 270 × 260 mm. | Axes and inside/outside are unlabelled. |
| Flying Box | Case L18 × W9 × H9.25 in; base 18.5 × 9.5 in. | Case boundary unlabelled; retain the larger base. |
| iDisplayit | Inside L47 × W26 × H24 cm; outside L49 × W28 × H25 cm. | Labelled cavity still needs the intended full scene. |
Brickcessories gives an assembled sequence without named axes. Obtain a labelled drawing rather than assigning the last number as usable height. Its glossy black base and aluminum corner hardware do not resolve the missing receiving boundary.
Flying Box gives a separate base footprint. Keep that full 18.5 × 9.5-inch rectangle in the furniture enquiry, and request the clear cavity independently. The smaller case line should not stand in for the whole enclosure’s support area.
A printed floor is a specific order option
Wicked Brick’s regular 21354 page distinguishes Premium Printed Display, Printed Background and Clear Background. Its premium option describes both a printed back and printed base. Confirm that exact selection when you want woodland imagery under the scene, rather than assuming every forest-back version includes it.
The same description specifies a single 5 mm matte-black base plate, 3 mm clear panels and an information plaque. It does not establish the tiered magnetic base or locating map described on some other products. Ask about this case’s own receiving layout instead of transferring those features.
Kingdom Brick Supply lists a 56 × 36-stud reference; iDisplayit lists 58 × 32 studs. These references do not map the full upper branches or prove every truck-and-character arrangement. Keep the chosen scene with the labelled interior and actual floor version.
Keep the room view and the access routine together
LEGO describes a removable roof and removable house levels for viewing the rooms. Decide whether those sections normally stay installed. If they will be removed occasionally, reserve their waiting positions after establishing how the outer enclosure opens.
Wicked Brick describes lifting the clear case from grooves. iDisplayit describes a top secured to the surround, which lifts away from the base. For either selected product, ask how the complete surround clears the tall tree and where it rests before the house is approached.
Kingdom Brick Supply and iDisplayit both state that their cases are not designed for relocation with the model inside. Settle the final furniture position before completing the populated display. The model’s height and the cover’s movement are different parts of that plan.
Use the Cullen House scene and floor worksheet with the LEGO shelf case guide. Keep the selected artwork, tree, vehicle, character positions and unresolved receiving dimensions in the same enquiry.
Common questions
Does the house’s 37 cm width describe the whole scene?
It is the official house reference. Record the actual truck, tree and character arrangement separately.
Does a forest background include a printed floor?
Check the exact option. The cited Wicked Brick page expressly distinguishes the premium printed back-and-base version.
Comments
Share a display tip or ask a question.