Choose a LEGO Captain America shield display case for the complete 76262 assembly, including its actual support, nameplate and minifigure accessories. The shield’s diameter does not describe the height and depth of every supported presentation. Start by choosing the support and deciding whether you want an enclosure or an open wall display.
The circular face is one part of the occupied display
LEGO’s official 76262 specification gives a shield over 47 cm in diameter, resting on a stand with a nameplate. It also identifies a Captain America minifigure with its own shield and Mjölnir.
Keep the original stand if it belongs in your intended scene, or name the exact replacement support. Record the complete height and front-to-back projection in that actual position. A circular diameter alone cannot locate a rear support or describe how far the base projects toward the front.
Give the figure and its retained accessories their own position. Decide whether the original nameplate remains attached to the original stand or sits in a maker-defined receiving area. Moving it into an apparently empty corner may change the view without establishing an approved placement.
A shallow rear-stem case is a different construction from a no-stand box
| Choice | Keep in the record | Resolve before ordering |
|---|---|---|
| Original supported model | Shield, original stand, plate, figure and retained accessories. | The cavity for that entire arrangement above the case floor. |
| Maker’s rear-mounted support | Exact stem, intended attachment and figure/plaque receiver. | Included components, complete supported projection and front access. |
| Open wall stand | Whole wall presentation and separate small-piece support. | Actual fixing and handling instructions; an enclosure is not implied. |
Wicked Brick describes a bespoke rear-mounted stem holding the shield in a floating position, with the figure and plaque to its right. It also names a removable magnetic front panel. That product’s shallow depth should stay with that construction, rather than being treated as a cavity for every original-stand arrangement.
shopPOPdisplays P_21116 expressly excludes both LEGO studs and a stand. The black base it includes is not a promise of a substitute shield support. Ask how your complete retained arrangement is received instead of copying the stand-inclusive package from its Camaro product.
Compare the same receiving boundary and actual support
These descriptions were read on 18 October 2026. Inside, outside and unclassified figures remain attributed to their own products; DisplayCasePro has not fitted the shield, installed a wall mount or tested protection.
| Source | Published figures | Boundary or package question |
|---|---|---|
| Wicked Brick | W53 × D13 × H50.3 cm. | Inside/outside unlabelled; rear stem and magnetic front belong to this product. |
| iDisplayit | Inside L52 × W21 × H52 cm; outside L54 × W23 × H53 cm. | Actual supported model and chosen black or white base. |
| shopPOPdisplays P_21116 | Approx. external including base H21 × W22 × D10 in. | Stand and LEGO studs expressly excluded; actual cavity still needed. |
| FantasMall | L × W × H20 × 10 × 20 in / 50 × 25 × 50 cm; FAQ calls sizes internal. | Confirm selected base material and cavity above its finished surface. |
| BrickShell | H20¼ × W18⅜ × D14⅜ in; snap-fit construction. | Inside/outside unlabelled; integrated studs and intended support arrangement. |
A base upgrade needs a consistent current specification
FantasMall’s page announces a solid wood base, while its materials field still says acrylic and PVC. Keep that discrepancy with the quotation. Ask which base is supplied in the selected version and where the inside-height measurement begins.
Its general FAQ describes approximate increases from internal to external dimensions. Those offsets should not become a fabricated precise exterior for an unresolved base version. Likewise, the page’s mixed collection of customer reviews is not a 76262-specific fitting test.
BrickShell describes clear and flag-backdrop looks, while the selector read shows Flag Background and Black. Confirm the current orderable combination rather than making the description, selector and every gallery image into one assumed package. Printed imagery changes the view and does not itself establish UV filtering.
Keep the figure visible and identify the actual opening route
View the complete arrangement from the planned shelf height. The shield’s broad face can dominate the composition while the small figure or low nameplate sits behind a case border. Fixed receiving positions need checking against that view before ordering artwork.
The authorized CubeBuff image below instead shows an open wall stand, with a separate support for the small display pieces. Its mount-size line should not be substituted for the outline of a shield whose diameter already exceeds 47 cm. Request the complete wall arrangement and product-specific fixing instructions.
For the cited Wicked Brick case, retain the named magnetic-front access method. For snap-fit or screw-assembled products, obtain their own routine-opening instructions. Assembly seams do not establish a universally removable front. Identify how the shield remains supported and where removed enclosure parts rest before approaching the model.
Use the shield support and package worksheet with the measurement guide. The collection-wall guide covers placement after the complete mounting arrangement is confirmed.
Common questions
Can I choose the case using only the 47 cm diameter?
Record the actual stand, full height and depth, plate and figure arrangement too. Diameter is a model reference, not a complete supported envelope.
Does the shallowest quoted depth indicate the best case?
Match the intended support and clear cavity first. The cited products use different constructions and measurement boundaries.
Comments
Share a display tip or ask a question.