LEGO Peely Bone Display Cases: 77072 Arms, Gear and Base Fit

Choose a LEGO Peely Bone display case for set 77072 in the arm and wrist pose you intend to keep, with the selected gear, rear bag and original model stand. A case’s outside rectangle does not confirm that complete arrangement. Keep the model’s nameplate separate from an additional information plaque supplied by a case maker.

77072 has movable arms and wrists, with gear behind and beside it

The official Peely Bone description identifies movable arms and wrists, a Peely Pick Pickaxe, paint launcher and Banana Bag Back Bling. The model includes a display stand and nameplate. LEGO describes a height of over 36 cm; the cited specification does not supply complete width and depth for every pose.

Keep the set number with your case enquiry. A custom rebuild using Peely Bone parts, a smaller Fortnite figure and the original 77072 model have different outlines. A receiver named for this kit should still be checked against the actual stand and gear arrangement you plan to display.

Choose the settled arm and wrist positions under the model instructions. Include the furthest part of each held item and the rear bag in front and side records. Avoid planning only from the banana’s central upright shape while leaving the accessories to fit whatever space remains.

Keep inside, outside and unlabelled sizes separate

Product descriptions were reviewed on 19 October 2026. Keep each maker’s stated dimension boundary with the selected case, and obtain a current drawing where the usable space remains unclear. DisplayCasePro has not physically tested these cases, articulated poses, UV filtering, dust exclusion or load ratings.

Blacked Brick’s 38 cm exterior height minus LEGO’s rounded over-36 cm model reference is not a verified two-centimetre allowance. The actual model stand, finished case floor, panel boundary and complete chosen pose all matter. Ask where the clear-height measurement starts.

Likewise, retain iDisplayit’s L/W labels when comparing its inside plan with another maker’s W/D plan. Do not assign a direction to Brickcessories’ unlabelled sequence from the order of numbers alone. A larger outside footprint does not establish a larger unobstructed cavity.

Record the selected gear and the complete supported pose

A front-facing picture can conceal the rear bag or shorten a tool’s apparent projection. Compare the intended arrangement from both front and side, with the same stand retained. Do not push a held item against a clear panel to compensate for an unconfirmed cavity.

A settled pose and the room needed to change it are separate requirements. If you want to alternate gear positions, record each finished arrangement and ask whether the case must open first. No published overall rectangle establishes the full movement envelope of the arms or wrists.

The model stand, a case cutout and a case plaque are distinct parts

Blacked Brick describes a shaped cutout in its base to locate the set. Ask how the complete original model stand is received and whether any change is expected. A locating feature at the bottom does not confirm clearance around the upper figure or authorize removal of an original support.

Wicked Brick lists a 5 mm gloss-black case base, 3 mm clear panels and a separate 3 mm etched information plaque. Brick In It describes 3 mm Perspex panels, a 5 mm gloss base and metal corner cubes. These are case-construction records, not the thickness or geometry of LEGO’s model stand.

Brickcessories lists 4.5 mm and 3 mm acrylic with aluminum brackets and screws, but the short description does not assign every thickness to a particular surface. Do not calculate a clear cavity by subtracting an assumed panel from each side. Retain the supplied-part drawing as a separate requirement.

Choose the rear around the actual arm and bag outline

Wicked Brick, Blacked Brick and Brick In It offer clear or printed-rear choices; Brickcessories also lists a black rear. iDisplayit’s black/white choice refers to the base. Keep those configuration fields distinct instead of treating all colour choices as interchangeable background options.

View the planned figure at its intended shelf height. Decide which side of the split banana/skeleton design and which gear should be most visible. A printed scene can change the composition, but it does not provide extra depth behind the bag or a verified UV-filtering specification.

Reserve the cover route before planning frequent pose changes

Wicked Brick describes lifting the clear surround from the base and returning it to grooves. Leave a route past the actual figure and gear, plus a place for the removed surround. The closed case height is not a stated removal distance.

For the other products, obtain the usual access procedure for the selected version. Flat-packed shipping, screws and corner fittings explain assembly without necessarily identifying the panel intended for repeated opening. Keep model handling independent of the enclosure, using its actual stand and instructions.

Use the 77072 pose, stand and case worksheet for the unresolved boundaries. The collection measurement guide covers consistent complete outlines.